Bulk URL Opener

Paste a list of links and open multiple URLs at once — in separate tabs or separate windows, with an optional delay between each one. Free, no signup, no extension, and nothing you paste ever leaves your browser.

Your URLs — one per line
Valid 0 Duplicates 0 Unreadable 0 Total lines 0

Tip: press Ctrl + Enter to open. Your browser will ask for permission the first time — allow it once and every later batch opens in full.

Opening…0 / 0

These lines could not be read as URLs:

    Why other bulk openers “lose” links: a browser lets a page open only one tab per click unless you have allowed popups for that site. Most tools fire the whole list anyway, the browser drops everything after the first, and you never find out which links were skipped. This one stops at the first refusal, keeps the rest of the queue, and picks up exactly where it left off — or opens them one click at a time, which no browser blocks.

    How to open multiple URLs at once

    1

    Paste your links

    Put your URLs in the box, one per line. Commas and spaces work too, and the tool strips bullets, quotes and markdown automatically.

    2

    Check the counter

    The counter shows how many links are valid, how many are duplicates and how many could not be read, before you open anything.

    3

    Choose tabs or windows

    Pick separate tabs for scanning or separate windows for side-by-side work, and set a delay if you are opening a large batch.

    4

    Press Open URLs

    If your browser refuses part of the batch, the tool pauses there, shows the one-time step to allow it, and then opens the rest. Or switch to one-at-a-time, which never needs a permission change.

    URLs not opening? Allow popups once

    This is the single reason a bulk URL opener appears not to work. The fix takes one click and it is permanent for this site:

    • Chrome and Edge: a small blocked-popup icon appears at the right of the address bar. Click it, choose Always allow pop-ups and redirects from sigmawire.net, then press Open URLs again.
    • Firefox: a yellow bar appears across the top of the page. Click Options or Preferences, then Allow pop-ups for sigmawire.net.
    • Safari: open Safari → Settings → Websites → Pop-up Windows and set sigmawire.net to Allow.
    • Brave: click the shields icon, then allow pop-ups for this site.

    You only do this once per browser. Afterwards the delay, batch and separate-window options all work on every visit.

    What you can use it for

    • SEO and site audits — open every URL from a crawl export and eyeball them in one pass instead of clicking through a spreadsheet.
    • Daily routines — save your morning dashboards, inboxes and reports as a named list and open the whole set in one click.
    • QA and deployment checks — open the same set of pages on staging and production with a delay so you do not hammer the server.
    • Research — drop a batch of search results or citations into separate windows and compare them side by side across two monitors.
    • Social and outreach — open a list of profiles or prospect pages in sequence without copying and pasting each one.

    Related tools

    Working through a list of URLs usually means a few other jobs as well: Meta Tag Extractor pulls the title and description out of a page, Email Validator checks an address is real before you send to it, Image to URL Converter turns an image into a shareable CDN link, and the Web Tools Hub lists everything else.

    Frequently asked questions

    How do I open multiple URLs at once?

    Paste your links into the box, one per line, then press Open URLs. Every valid link opens in its own browser tab. You can also separate links with commas or spaces — the tool detects the format automatically and cleans up bullets, quotes and stray markdown.

    Why are my URLs not opening?

    Almost always the browser popup blocker. A browser allows a page to open only one new tab per click unless you have allowed popups for that site. This tool stops at the first link the browser refuses instead of firing the rest into the blocker, shows you the exact steps for your browser with screenshots, and then resumes the remaining links where it left off. Nothing is lost and nothing is asked if your browser already allows popups.

    Can I open multiple URLs without changing any browser setting?

    Yes. Choose one at a time when the tool offers it. Each click opens the next link, and a click is always permitted, so no browser ever blocks it. It is slower than a full batch but it needs no permission and works everywhere, including on mobile.

    How do I allow popups so all URLs open?

    When your browser shows the blocked-popup icon in the address bar, choose the option that always allows popups from sigmawire.net, then run the batch again. In Chrome and Edge it is the small icon at the right of the address bar; in Firefox it is a bar across the top of the page; in Safari it is Settings, then Websites, then Pop-up Windows.

    Can I open URLs in separate windows instead of tabs?

    Yes. Switch the Open in setting to Separate windows and each link gets its own browser window, cascaded so they do not land exactly on top of each other. Tabs are better for scanning, separate windows are better for side-by-side comparison across monitors.

    Can I add a delay between each URL?

    Yes. Choose a delay from none up to ten seconds, or type your own value. A delay is useful when the sites are heavy, when you are checking a server under load, or when opening thirty tabs at once would freeze a slower machine.

    How many URLs can I open at once?

    There is no limit in the tool itself. The practical limit is your machine: past roughly fifty tabs most browsers slow noticeably. Use the batch size option to open a set number at a time, and a delay to spread the load.

    Does the tool remove duplicate URLs?

    Yes, and it is on by default. Duplicates are counted and skipped so a list pasted from a spreadsheet does not open the same page five times. Clean list also trims whitespace, drops blank lines and can sort the list alphabetically.

    Can I save my URL lists for later?

    Yes. Name a list and save it. Saved lists are stored in your own browser using local storage, so they stay on your device, survive a refresh, and are never uploaded anywhere.

    Is my data safe? Do you see the URLs I enter?

    No. The tool runs entirely in your browser. The links you paste are never sent to our server, never logged and never stored anywhere but your own device. You can confirm this by opening the page, disconnecting from the internet and watching the tool still parse your list.

    Can I import a list of URLs from a file?

    Yes. Import accepts .txt and .csv files and pulls every link out of them, so you can go straight from an export to an open batch without cleaning the file by hand.

    Does the bulk URL opener work on mobile?

    It works, with a caveat that applies to every tool of this kind: mobile browsers are much stricter about opening multiple tabs, and most will open only the first link. For real bulk work use a desktop browser. The interface itself is fully responsive.

    Do I need to install an extension or sign up?

    Neither. This is a web page, not a browser extension, so there is nothing to install, no permissions to grant to an add-on, and no account. Extensions can read the pages you visit; a page like this cannot.